How to Reset a Hoverboard

From time to time, you might find that your hoverboard needs reset in order to balance properly. This makes knowing how to reset a hoverboard and essential part of owning one. Follow this simple guide, and the process will be over within a matter of seconds.

Getting Started

First, make sure the hoverboard is turned off and sitting level with the ground. This process cannot be done if the hoverboard is upside down! Only DUO Series models are designed to recalibrate in an upside-down position.

Resetting

Press and hold the power button for ten seconds, ignoring the flashing lights and beeps. These are simply indicating that the board needs to be recalibrated to balance properly. While holding the button, the process is underway.

Testing

Let go of the power button and turn the board off. At this point, your board is reset and ready to be turned back on. Double-check to make sure the process worked, and that your board is balancing properly.

If you find that the hoverboard did not reset, try the process again before troubleshooting wire connections. That’s everything you need to know about how to reset a hoverboard the right way!